Scan Tool Operating Instructions - AK Automotive Training

Manufacturer Applications
Table 10 - Setting Conditions Table
Relevance when '1' is displayed in the 8 digit block. These setting conditions are met
only when 8 zeros are indicated.
X X X X X X X X Display Group 1 - Line 4
1 Not relevant
1 Ignition angle retardation during gearshift active
(auto only)
1 AC compressor not switched off (switched
automatically)
1 Idling switch not closed
1 Lambda control switched off
1 Throttle valve open
1 Engine speed within valid range
1 Engine temperature less than 80°C
Table 11 - Engine Load Operating State Table
Relevance when '1' is displayed in the 8 digit block. Read-out = 0, operating state not
achieved. Read-out = 1, operating state achieved
X X X X X X X Display Group 4 - line 4
1 Overrun fuel cut-off (10000000)
1 Idling (01000000)
1 Part load (0010000)
1 Full Load (00010000)
1 Not relevant
1 Not relevant
1 Not relevant
Engine Code: AAE
Display Description
Group
1 1. Engine speed.
2. Coolant temperature.
3. Lambda control value.
4. Operating state (see Table 12 for the relevance of the figures in line 4).
2 1. Engine speed.
2. Injection time (computed value between 1.5 and 3.5 ms at idle speed).
3. Battery voltage
4. Intake air temperature
99