Scan Tool Operating Instructions - AK Automotive Training

Manufacturer Applications
56 Idle
Speed
Stabilisation
60 Electronic
Throttle
System
61 Electronic
Throttle
System
62 Electronic
Throttle
System
63 Electronic
Throttle
System - kick
down
adaption
66 Cruise
Control
System
(CCS)
120 Traction
Control
System
1. Engine speed.
2. Specified engine speed.
3. Idle regulator.
4. Operating mode (for the relevance of this display line, see Table
69).
1. Throttle valve angle - sensor 1.
2. Throttle valve angle - sensor 2.
3. Learning step counter.
4. Adaption condition.
1. Engine speed.
2. ECU supply voltage.
3. Throttle valve angle - sensor 1.
4. Operating mode (for the relevance of this display line, see Table
70).
1. Throttle valve angle - sensor 1.
2. Throttle valve angle - sensor 2.
3. Accelerator pedal position - sensor 1.
4. Accelerator pedal position - sensor 2.
1. Throttle valve angle - sensor 1.
2. Throttle valve angle - sensor 2.
3. Accelerator pedal position.
4. Operating mode.
1. Vehicle speed.
2. Brake, clutch and CCS switch positions (for the relevance of this
display line, see Table 71).
3. Specified road speed (last value stored by CCS).
4. Position of CCS control switch (for the relevance of this display line,
see Table 72).
1. Engine speed.
2. Specified engine load.
3. Measured engine load
4. Status.
176