Scan Tool Operating Instructions - AK Automotive Training

Manufacturer Applications
2 1. Engine speed.
2. Injection period.
3. Battery voltage.
4. Intake air temperature.
3 1. Engine speed.
2. Engine load.
3. Throttle valve angle. Calculated figure, (dependent on throttle valve
potentiometer).
4. Intake air temperature.
4 1. Engine speed.
2. Engine load.
3. Not relevant.
4. Operating condition (see Table 4 for the relevance of these figures).
5 1. Engine speed.
2. Engine load.
3. N/A
4. Operating condition (see Table 4 for the relevance of these figures).
6 1. Lambda integration value (see note below).
2. Lambda integration value (see note below).
3. Learning value for idling stabilisation.
4. Intake air temperature.
NOTE: Always observe the values in lines 1 and 2 of this display group together.
If a 0 is displayed in line 1, line 2 must show a value between 0 and 70.
If 225 is displayed in line 1, line 2 must show a value between 144 and 255.
89