Scan Tool Operating Instructions - AK Automotive Training

Manufacturer Applications
Engine Code: AAT and ABP
Display Description
Group
1 1. Engine speed - 750 to 800 rpm for manual gearbox equipped vehicles,
and 690 to 750 rpm for automatic gearbox equipped vehicles.
2. Fuel quantity injected.
3. Piston movement sensor voltage.
4. Coolant temperature.
2 1. Engine speed - 750 to 800 rpm for manual gearbox equipped vehicles,
and 690 to 750 rpm for automatic gearbox equipped vehicles.
2. Accelerator pedal position (0% at idle).
3. Operating state (Refer to Table 16 for the relevant figures in line 3).
4. Intake air temperature.
3 1. Engine speed - 750 to 800 rpm for manual gearbox equipped vehicles,
and 690 to 750 rpm for automatic gearbox equipped vehicles.
2. Quality of air inducted (specified).
3. Quantity of air inducted (actual).
4. ERG valve duty cycle.
4 1. Engine speed - 750 to 800 rpm for manual gearbox equipped vehicles,
and 690 to 750 rpm for automatic gearbox equipped vehicles.
2. Start of injection (specified).
3. Start of injection period (actual).
4. Duty cycle of start of injection valve - N108
5 1. Engine speed.
2. Starting quantity injected (stored from last start).
3. Start of injection.
4. Coolant temperature.
6 1. Road speed.
2. Brake pedal status monitoring (refer to Table 17 for the relevance of the
figures in line 2).
3. Cruise control system status switch (refer to Table 18 for the relevance of
the figures in line 3).
4. Cruise control operating state.
7 1. Fuel temperature.
2. Intake air temperature.
3. Not relevant.
4. Coolant temperature.
8 1. Engine speed (full throttle test in 3rd or 4th gear, engine coolant temp
min. 80°C).
2. Desired fuel quantity injected (full throttle test in 3rd or 4th gear, engine
coolant temp min. 80°C, must indicate quantity limitation above 42mg/h).
3. Fuel quantity limitation (speed) - See Note 1 below.
4. Fuel quantity limitation (induced air) - See Note 2 below.
109