Scan Tool Operating Instructions - AK Automotive Training

Manufacturer Applications
Table 53 - Group 1 Operating Condition
Relevant when '1' is displayed in the 8-digit blocks
X X X X X X X X Display group 1 - Line 4
1 Coolant temperature above 80°C
1 Speed below 2000 rpm
1 Throttle valve closed
1 Lambda regulation OK
1 Idle switch closed
1 A/C compressor switch off
1 Not assigned
1 No faults recognised
Table 54 - Group 30 Lambda Regulation
Relevant when '1' is displayed in the 3-digit blocks
X X X Display group 30 - Lines 1 & 2
1 Lambda regulation active
1 Oxygen sensor operationally
ready
1 Oxygen sensor heating on
Table 55 - Group 55 Operating Conditions
Relevant when '1' is displayed in the 5-digit blocks
X X X X X Display group 55 - Line 4
1 A/C compressor switch on
1 Selected gear
1 A/C system switched on
X Not relevant
1 PAS pressure switch on
Table 56 - Group 56 Idle Control Operating Mode
Relevant when '1' is displayed in the 5-digit blocks
X X X X X Display group 56 - Line 4
1 A/C compressor switch on
1 Selected gear
1 A/C system switched on
X Not relevant
1 PAS pressure switch on
166