Scan Tool Operating Instructions - AK Automotive Training

Close Brakes
47
FastCheck
Select the Close Brakes option from the Service Brakes menu. The brake pistons will
now be moved to their reset position. Wait until the OmiCheck displays the close
brakes now complete message before continuing.
Calibrate Brakes
Select the Calibrate Brakes option from the Service Brakes menu. The brake pistons
will now be moved in and out to calibrate their position. Wait until the OmiCheck
displays the calibrate brakes now complete massage before continuing.
Volvo - Electronic Parking Brake (EPB) System
Volvo S80 (2007 -), V70 (2008 -), XC60 (2009-), XC70 (2008 -)
There are three options in the PBM/EPB function menu which can be used to access
various functions:
There are three functions available under the ‘Service Brakes’ menu option:
Enter Service Mode
This function is used to put the system into a state that enables work to be carried out
by the technician. The Control Module puts the callipers into a state where normal
operation is inhibited and the callipers cannot be closed by any means. This function
must be used if replacement of the brakes, discs or brake pads is carried out.
Pre-Test conditions:
• The vehicle must be stationary
• The vehicle must be on level ground
• The vehicle must be secured with wheel locks.
This function takes 30 seconds to complete.
NOTE: After this function has been performed the EPB callipers cannot be closed and
are inhibited until exit service mode is run. Cycling the ignition, disconnecting the
battery or diagnostics tester does not exit maintenance mode.
Ensure the on screen instructions on the service tool are followed precisely and in the
correct order.