Scan Tool Operating Instructions - AK Automotive Training

Manufacturer Applications
Table 28 - Throttle Control Learning Requirement
Relevant when '1' or '0' is displayed in the 8-digit block
X X X X X X X X Display group 23 - Line 1
0 Not assigned
1 Throttle valve positioner min. stop - learning
process not carried out
1 Throttle valve positioner max stop - learning
process not carried out
1 Throttle valve potentiometer min. stop - learning
process not carried out
1 Throttle valve potentiometer max stop - learning
process not carried out
0 Not assigned
1 Throttle valve positioner to throttle valve
potentiometer - balance not carried out
0 Not assigned
Table 29 - Display group 25 System Status
Relevant when '1' is displayed in the 8-digit block
X X X Display group 25 - Line 3
1 Camshaft timing adjustment active.
1 Intake manifold change-over active.
1 See WSM.
Table 30 - Display Group 27 System Status
Relevant when '1' is displayed in the 8-digit block
X X X Display group 27 - Line 1
1 Camshaft timing adjustment active.
1 Intake manifold change-over active.
1 See WSM.
Engine Codes: ADR, AEB, AJL, AJP
Display Description
Group
1 1. Engine speed.
2. Engine load.
3. Throttle valve angle.
4. Ignition angle.
2 1. Engine speed.
2. Engine load.
3. Ignition duration.
4. Intake air mass.
141