Scan Tool Operating Instructions - AK Automotive Training

Manufacturer Applications
Table 48 - Group 16 Activation of Heater Elements
Relevant when '1' is displayed in the 2-digit blocks
X X Display group 16 - Line 3
1 Low heat output relay on
1 High heat output relay on
Engine Codes: AJM, ATD and ATJ
Display Description
Groups
1 Injected
Quantity
1. Engine speed.
2. Injected quantity.
3. Injection duration.
4. Engine coolant temperature.
2 Idle Speed 1. Engine speed.
2. Accelerator pedal position.
3. Operating condition (for the relevance of this display line, see Table
49).
4. Engine coolant temperature.
3 EGR
System
4 Unit Injector
Valve
activation
4 Unit Injector
Valve
activation at
full load (3rd
gear)
5 Starting
Conditions
6 Switch
Position
1. Engine speed.
2. Specified intake air mass.
3. Actual intake air mass.
4. EGR valve duty cycle.
1. Engine speed.
2. Specified commencement of injection.
3. Injection duration.
4. Synchronisation angle.
1. Engine speed.
2. Specified commencement of injection.
3. Injection duration.
4. Synchronisation angle.
1. Engine speed.
2. Starting quantity
3. Commencement of injection.
4. Engine coolant temperature.
1. Vehicle speed.
2. Brake/clutch pedal positions (for the relevance of this display line,
see Table 50).
3. Accelerator pedal position.
4. Cruise control system (CCS) (see note below).
NOTE: Vehicles with cruise control = 0/1, without cruise control = 255
157