Scan Tool Operating Instructions - AK Automotive Training

Introduction
Safety Precautions
The following guidelines are intended to ensure the safety of the operator whilst
preventing damage to the electrical and electronic components fitted to the vehicle.
Equipment - prior to commencing any test procedure on the vehicle, ensure that the
tester, its harnesses and connectors are in good condition.
Polarity - always observe the correct polarity when connecting the tester to the vehicle
battery.
Before carrying out testing on a vehicle, the following procedure should always be
observed:
• Check the handbrake/parking brake is on.
• Check that neutral or park is selected.
• Keep test equipment and harnesses away from HT leads.
• Be aware of moving engine parts.
• Do not run engine in a confined space without adequate ventilation.
6