Scan Tool Operating Instructions - AK Automotive Training

EOBD
Main Menu Availability
Manufacturer Specific Applications
WARNING: It is recommended that you obtain an updated security key from the
Product Support team before updating the software in your OmiCheck unit as
the new software may not work with an old version key.
The OmiCheck is delivered with a range of Manufacturer Specific Applications
already installed, although some may not be turned on. To turn on an application, a
"key" is required from Omitec. When the application pack is purchased, the purchaser
will receive instructions for the application and information on how the application may
be enabled along with harnesses that may be required for the manufacturer range.
To enter the security key scroll up in the 'Main Menu', select 'User Menu' and then
'Security', finally select 'Enter Key'.
Enter Key
When an application/upgrade is purchased, the application pack instructs the user on
how to obtain the Security Key to turn on the application. The following keypad
buttons are used to enter the key.
& Scrolls through the possible characters to be used in the key.
Accepts the character selected and advances to the next character
location.
Exits the change key function without saving the key.
Moves backward through the key in the event of an error.
Show Key
Displays the current key that has been programmed into the OmiCheck. This controls
the applications that are available to the user. The key is an alphanumeric code of 15
or 20 characters.
Software Version
The software version of each of the applications installed is displayed. This
information is likely to be required in the event of the user contacting the help desk.
This menu item also informs the user what applications are installed if all have not
been purchased.
20