Scan Tool Operating Instructions - AK Automotive Training

Manufacturer Applications
By 1998 all Ford vehicles had changed to the EECV system, except:
• Those vehicles made in collaboration with the Japanese i.e. Maverick, Probe etc.
which use Japanese engine management systems.
• The diesel Ford Galaxy which has a VW engine and uses the Bosch EDC system.
• Transit 94 models which use the Lucas EPIC system.
EEC V Menu
Select the type of engine fitted to the vehicle then follow the on-screen instructions:
For a diesel vehicle, the type of engine can usually be found on the plastic engine
cover. To use a petrol variant the Petrol option should be selected.
If the Petrol option has been selected the following options will be provided:
1. Read DTCs
2. Clear DTCs
3. Live Data 1
4. Live Data 2
5. Freeze Data
6. Continuous Tests
7. Output Test
8. KOEO Test
9. KOER Test
10. Read VIN
For help on freeze data and continuous tests, refer to the EOBD section of this
document.
Output Test - Circuit Tests
The ignition must be on and the engine off. "Test in Progress" will be displayed. The
test will automatically exit after 20 seconds for safety.
KO EO Test - Key On/Engine Off Self Test
This test is programmed into the ECU. It is to be carried out with the ignition on but
engine off. Switch off all ancillary items e.g. Heaters, Aircon etc. "Performing test
Please wait" will be displayed whilst the test is being performed. After the test has
been completed the test results will be requested and the fault codes displayed.
217