Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 3. Creating Your Own Sounds<br />
KEY-OFF-N:<br />
fig.3-34.e<br />
press key<br />
KEY-OFF-D:<br />
fig.3-35.e<br />
The Tone will not sound while the key is<br />
being pressed, but will sound after the<br />
Delay Time when the key is released.<br />
Delay<br />
Time<br />
release key<br />
The Tone will not sound while the key is<br />
being pressed, but will sound after the<br />
Delay Time when the key is released.<br />
However for this setting, the TVA envelope<br />
of the Tone will begin when the key is<br />
pressed, so in most cases only the decay<br />
portion of the sound will be heard.<br />
Time (Tone Delay Time)<br />
Specify the time after when the Tone will sound when using<br />
Tone Delay.<br />
If PLAYMATE has been selected in Tone Delay mode, a<br />
setting of 64 will mean that the delay time will be set to the<br />
interval between the previous Note On and the current Note<br />
On. A setting of 127 will result in a time that is twice as long<br />
as for a setting of 64, and a setting of 32 will result in a time<br />
that is 1/2 as long.<br />
If the Tone Delay Mode is set to CLOCK-SYNC, the setting<br />
will be in quarter-note steps, and the corresponding note<br />
value symbol will also be displayed. This lets you specify the<br />
delay time in note lengths relative to the synchronization<br />
tempo.<br />
* If the Type parameter (PATCH/COMMON/STRUCT) is set to<br />
a selection of 2–10, the outputs of Tone 1 (3) and 2 (4) will be<br />
combined into Tone 2 (4). This means that the settings of Tone 1<br />
(3) will be ignored.<br />
press key<br />
Delay<br />
Time<br />
release key<br />
* If you have selected a Wave that is a decay-type sound (i.e., a<br />
sound that fades away naturally even if the key is not released),<br />
selecting KEY-OFF-N or KEY-OFF-D may result in no sound<br />
being heard.<br />
TEMPO-SYNC: If you select a Wave with tempo (BPM)<br />
being displayed, the Tone will synchronize<br />
to the tempo clock of the system regardless<br />
of which key is pressed. This is most<br />
effective when playing phrase loops in sync<br />
with the tempo of a song (p. 130).<br />
If you want to sync to the tempo of a system<br />
in Patch mode, set the Source parameter<br />
(PATCH/COMMON/PATCH CLOCK) to<br />
SYSTEM.<br />
If you want to sync to the tempo of a system<br />
in Performance mode, set the Source<br />
parameter (PERFORM/COMMON/<br />
PERFORM CLOCK) to SYSTEM.<br />
Chapter 3<br />
* When TEMPO-SYNC is selected, pitch and FXM settings will<br />
be ignored.<br />
* When selecting TEMPO-SYNC, also set the Time parameter to<br />
0. If other values are set, Tone Delay will be activated.<br />
77
Change language