Training, Installation & Service Manual - Livewire Connections Ltd

6.3.2.1 Information fields on the Dashboard
SAILOR 900 VSAT
parameter
System status
GPS position
Vessel heading
Satellite profile
Satellite position
RX polarisation
Description
Current status of the SAILOR 900 VSAT.
Examples:
Not ready (waiting for input from GNSS, e.g. GPS)
Ready (waiting for data from the VSAT modem or no satellite
profile selected)
Pointing antenna (locating the satellite)
Acquiring signal (acquiring the satellite signal)
Tracking (tracks the current satellite)
No Tx zone (antenna is pointing in a no TX zone; TX is off)
Blocking zone (antenna is pointing into a blocking zone)
Service switch (service switch in ADU activated)
Safe mode (error, followed by an error description)
Current position of the vessel, reported by the GPS module
Ship’s heading in degrees with reference to North, provided by
the ship’s gyro.
Name of the currently active satellite profile.
Position of the satellite selected in Satellite profile.
Horizontal or vertical.
Configuration with the web interface
6666
TX polarisation a
RX RF frequency a
Co-pol or X-pol, auto-selected by VSAT modem
Ku band receiving frequency, auto-selected by VSAT modem
Configuration
LNB Lo frequency a
TX RF frequency a
BUC Lo frequency
Tracking RF
frequency
ACU part name, ADU
part name, ACU
serial number, ADU
serial number,
Software version
Auto-selected by VSAT modem
Auto-selected by VSAT modem
12.8 GHz (system parameter)
Currently tracking RF frequency.
Part names, serial numbers for ACU and ADU, software version
of the SAILOR 900 VSAT.
Table 6-5: Web interface, DASHBOARD, SAILOR 900 VSAT parameters
a. Can be altered when using a generic modem profile.
98-133966-E2 Chapter 6: Configuration 6-19