Training, Installation & Service Manual - Livewire Connections Ltd

Supported commands
Command
satellite rx_rf_freq
satellite rx_rf_freq
12.123456 9.75
satellite rx_if_freq
satellite rx_if_freq
1200.123 9.75
Description
Shows or sets the Ku-band rx frequency and LNB
Lo frequency.
• RF frequency: 10.7 — 12.75 GHz.
• LNB Lo frequency: 9.6 GHz — 11.3 GHz.
The SAILOR 900 VSAT supports any LNB Lo!
Note: Setting the Ku-band rx frequency and LNB Lo
automatically configures the L-band rx frequency:
Rx L-band freq = rx_rf_freq – LNB Lo
Example: 1567.890 MHz = 11.567890 GHz – 10
GHz
Shows or sets the IF rx frequency together with the
LNB Lo frequency.
• IF frequency within 950 MHz – 2150 MHz.
• LNB Lo frequency within 9.6 GHz – 11.3 GHz.
The SAILOR 900 VSAT supports any LNB Lo!
Note: Setting the L-band rx frequency and LNB Lo
automatically configures the Ku-band rx frequency:
Rx Ku-band frequency = LNB Lo + rx_if_frequency
Example: 11.567890 GHz = 10 GHz +
1567.890000 MHz
satellite tx_lo Shows the current TX LO frequency, fixed at 12.8
GHz.
satellite tx_rf_freq
satellite tx_rf_freq
14.123456
Shows or sets the Set the RF frequency used for tx.
• Valid range: 13.75 GHz to 14.5 GHz.
Note: Configuring the Ku-band tx frequency
automatically configures the L-band frequency:
L-band frequency = Ku-band tx frequency – 12.8
GHz (BUC Lo)
Example: 1308.300000 MHz = 14.108300 GHz –
12.8 GHz
Table D-8: UCLI command: satellite (Continued)
D-8 Appendix D: Command line interface 98-133966-E2