Training, Installation & Service Manual - Livewire Connections Ltd

Unpacking
3.1.1.3 ACU (19” rack version)
Unpack your SAILOR 900 VSAT ACU (19” rack version) and check
that the following items are present:
• 1 x Ethernet cable (2 m)
• 1 x Ethernet cable (short)
• Power connector
• 2 x 75 Ohm coax cables F-F (1m), for Rx and Tx
• NMEA multi-connector
• Installation manual (this manual)
• Quick guide
3.1.2 Initial inspection
Inspect the shipping cartons and wooden box immediately upon
receipt for evidence of damage during transport. If the shipping
material is severely damaged or water stained, request that the
carrier's agent be present when opening the cartons and wooden
box. Save all box packing material for future use.
WARNING! To avoid electric shock, do not apply
power to the system if there is any sign of shipping
damage to any part of the front or rear panel or the
outer cover. Read the safety summary at the front of
this manual before installing or operating the system.
After unpacking the system, i.e. removing the top and sides of the
wooden box and opening the cartons, inspect it thoroughly for
hidden damage and loose components or fittings. If the contents are
incomplete, if there is mechanical damage or defect, or if the system
does not work properly, notify your dealer.
3-2 Chapter 3: Installation 98-133966-E2