Training, Installation & Service Manual - Livewire Connections Ltd

Keypad and menus of the ACU
SATELLITE menu
TX POLARIZATION
RX FREQUENCY
LNB LO
TX FREQUENCY
BUC LO
Description
X-polarisation or Co-polarisation, auto-selected by VSAT modem
Ku band receiving frequency of the active satellite, auto-selected by
VSAT modem.
Auto selected by VSAT modem.
Transmission frequency, auto-selected by VSAT modem
12.8 GHz, system parameter
Table 6-16: SATELLITE menu of the ACU (Continued)
EVENT
menu
Description
In this menu all active events are listed. Use and to go through the
active events.
Events can be of the type WARNING or ERROR. For a list of events see Event
messages — overview on page G-1.
If a new event occurs or there is a change in the event list while you are in
the EVENTS menu, a * is shown in the upper left corner of the display, next
to the menu name. Press OK to update the EVENTS list, the * will be
removed.
A > means the event text is longer than the display. Press to > to see the
remaining text.
Table 6-17: EVENTS menu of the ACU
Example:
EVENT 1/4*: This is the first event out of a list of 4 and
there has been a change in the list. EVENT 1/4 will
always be shown, the * indicates that there has been a
change.
6.4.4 Adjusting brightness of the display
To adjust the brightness do the following:
1. Press and hold OK for a short moment until BRIGHTNESS XXX%
is displayed (XXX is the current brightness value).
2. Hold OK pressed + press for lighter or for darker display.
3. Release OK to leave the brightness menu.
6-54 Chapter 6: Configuration 98-133966-E2