Training, Installation & Service Manual - Livewire Connections Ltd

STM SatLink 2900 VSAT modem
To display the antenna setup for the STM Satlink 2900 modem, type:
odu antctrl show
Example:
odu antctrl show
Antenna Controller Configuration
--------------------------------
Type
: Thrane & Thrane
SAILOR 900
Enabled
: All
IP address : 10.110.2.226
Polling frequency : 5 sec
Antenna Stability Tries : 300
Antenna Controller Status
--------------------------------
Controller detected : no
Packets sent : 0
Packets received : 0
C.4.2
ACU configuration
To set up the ACU to work with an STM Satlink 2900 VSAT modem,
do as follows:
1. Add a modem profile with the STM Satlink 2900 modem. See
VSAT modem profile — New entry and Edit on page 6-24.
2. Add a satellite profile using the STM Satlink modem profile just
created. See Satellite profiles — New entry and Edit on page 6-21.
3. Edit the network settings and input the IP information supplied
with the modem. See Configuring the LAN network on page 6-29.
4. Activate the satellite profile.
C-16 Appendix C: VMU settings requirements 98-133966-E2