Training, Installation & Service Manual - Livewire Connections Ltd

List of figures
Figure 9-31: Polarisation Motor Module, inserting ................................................................. 9-31
Figure 9-32: Location of the PCM............................................................................................9-32
Figure 9-33: Removing the PCM — connectors .......................................................................9-33
Figure 9-34: Motors and encoders..........................................................................................9-34
Figure 9-35: Location of the Elevation Motor & Encoder .........................................................9-35
Figure 9-36: Elevation motor and encoder, loosen the belt tensioner .....................................9-35
Figure 9-37: Elevation Motor and Encoder, adjust belt tension...............................................9-36
Figure 9-38: Elevation DDM, disconnect 2 connectors.............................................................9-36
Figure 9-39: Elevation motor and encoder, loosen the screws for the motor assembly............9-37
Figure 9-40: Elevation motor and encoder, tighten the screws for the motor assembly .......... 9-38
Figure 9-41: Elevation motor and encoder, adjust belt tension .............................................. 9-38
Figure 9-42: Elevation motor and encoder, check of belt tension............................................9-39
Figure 9-43: Elevation motor and encoder, loosen the belt tensioner .....................................9-39
Figure 9-44: Azimuth motor, remove cover............................................................................. 9-41
Figure 9-45: Azimuth motor, loosen the belt tensioner ........................................................... 9-41
Figure 9-46: Azimuth motor, adjust belt tension.....................................................................9-42
Figure 9-47: Azimuth DDM, disconnect connector ..................................................................9-42
Figure 9-48: Azimuth motor, loosen the screws for the motor assembly .................................9-43
Figure 9-49: Azimuth motor, tighten the screws for the motor assembly.................................9-44
Figure 9-50: Azimuth motor, adjust belt tension.....................................................................9-44
Figure 9-51: Azimuth motor, tighten the belt tensioner ..........................................................9-45
Figure 9-52: Azimuth encoder, remove cover..........................................................................9-46
Figure 9-53: Azimuth DDM, disconnect connector ..................................................................9-46
Figure 9-54: Azimuth encoder, remove...................................................................................9-47
Figure 9-55: Azimuth encoder, adjust belt tension..................................................................9-47
Figure 9-56: Azimuth Encoder, adjust belt tension ................................................................ 9-48
Figure 9-57: Azimuth motor, tighten the belt tensioner ......................................................... 9-48
Figure 9-58: Replacement of X-Elevation Motor & Encoder 1 .................................................9-49
Figure 9-59: X-Elevation Motor & Encoder — belt tension/adjustment screw ......................... 9-50
Figure 9-60: Cross Elevation motor assembly, 4 Allen screws ................................................ 9-50
Figure 9-61: Cross Elevation motor assembly, do not tighten screws ...................................... 9-51
Figure 9-62: X-Elevation Motor & Encoder — adjust belt tension ............................................ 9-51
Figure 9-63: Belt tension in 3 positions ..................................................................................9-52
Figure 9-64: Cross Elevation motor assembly, tighten screws .................................................9-52
Figure 9-65: Polarisation Motor, disconnecting power............................................................9-53
Figure 9-66: Polarisation Motor, removing 4x4 mm Allen screws............................................9-53
Figure 9-67: Removing the sub-D connector of the PMM........................................................9-54
98-133966-E2
xix