Tecnai on-line help manual -- Options - UT Southwestern

<strong>Tecnai</strong> on-line help Options 114Options Software version 28.2 Free Lens Control PanelActivateWhen the Activate button is pressed the Free Lens Control isswitched on (the button becomes yellow) or off.Get from 'scopeWhen the Get from 'scope button is pressed, the current lenssettings are copied from the microscope to the Free Lenssettings. This function can be used before activating Free LensControl to make the current lens settings on the microscope thestarting settings for working with Free Lens Control.For each lens the following controls are presentMicroscope valueThe microscope value lists the current lens value as it is on the microscope. The display will update eachtime a lens setting is changed, also when Free Lens Control is not active.Free Lens Control valueThe Free Lens Control value in the edit control displays the value used for a particular lens in Free LensControl. You can change the value by typing another value. The value is transmitted to the Free LensControl slider when the Enter button is pressed. If Free Lens Control is active, the new value is then seton the microscope (otherwise only the slider setting changes).Enter buttonWhen the Enter button is pressed, the Free Lens Control value is transmitted to the Free Lens Controlslider. If Free Lens Control is active, the new value is then set on the microscope (otherwise only theslider setting changes).Free Lens Control sliderThe Free Lens Control slider controls the setting of the particular lens. When Free Lens Control is activeany change of the slider is transmitted immediately to the microscope. The step sizes (small step by