Tecnai on-line help manual -- Options - UT Southwestern

<strong>Tecnai</strong> on-line help Options 154Options Software version 211.2 AutoAdjust (Expert) Control PanelThe AutoAdjust Control Panel provides a number of automatedfunctions:• AutoFocus with or without autostigmation• Auto beam center• Auto rotation center• Auto eucentric heightFocusWhen the Focus button is pressed, the AutoFocus procedure is started when the button is gray. Whenthe procedure is already running (the button is yellow), the procedure is canceled.The Focus button is enabled when :• No other procedure is running.• The currently active microscope mode is compatible with the AutoFocus procedure (TEM imaging orNanoprobe imaging at magnifications