Tecnai on-line help manual -- Options - UT Southwestern
Tecnai on-line help manual -- Options - UT Southwestern
Tecnai on-line help manual -- Options - UT Southwestern
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<str<strong>on</strong>g>Tecnai</str<strong>on</strong>g> <strong>on</strong>-<strong>line</strong> <strong>help</strong> Opti<strong>on</strong>s 116Opti<strong>on</strong>s Software versi<strong>on</strong> 2Register labelThe register label edit c<strong>on</strong>trol c<strong>on</strong>tains the label of a register. It can be either a label typed in for a newregister or the register currently selected. The label of a register can be anything (up to 255 characters)except empty. If you do not specify a label yourself, the software will automatically call the register'Register' with a serial number when a new register is added. The software does not check for labelc<strong>on</strong>tents (that is, whether two registers have the same label).AddWhen the Add butt<strong>on</strong> is pressed, a new register is added to the currently defined registers. The settingsof the new register are those currently defined for Free Lens C<strong>on</strong>trol. Registers can be addedirrespective of whether Free Lens C<strong>on</strong>trol is off or <strong>on</strong>.OverwriteWhen the Overwrite butt<strong>on</strong> is pressed, the currently selected register is overwritten with new settings.These settings are those currently defined for Free Lens C<strong>on</strong>trol. Registers can be added irrespective ofwhether Free Lens C<strong>on</strong>trol is off or <strong>on</strong>.DeleteWhen the Delete butt<strong>on</strong> is pressed, the currently selected register is deleted. The software asks forc<strong>on</strong>firmati<strong>on</strong>.OpenWhen the Open butt<strong>on</strong> is pressed, the Open file dialog is displayed in which a file can be selected (theextensi<strong>on</strong> for Free Lens C<strong>on</strong>trol files is .frl). The c<strong>on</strong>tents of this file are then loaded into the registers(overwriting anything that is there).Save, Save asThrough the Save or Save as butt<strong>on</strong>s the c<strong>on</strong>tents of the registers can be saved to a file (the extensi<strong>on</strong>for Free Lens C<strong>on</strong>trol files is .frl). When the Save butt<strong>on</strong> is used and a file name has been definedpreviously, the c<strong>on</strong>tents of the existing file are overwritten. When no file name has been defined or theSave as butt<strong>on</strong> is used, the Save file dialog is displayed, allowing definiti<strong>on</strong> of the file name under whichthe settings are stored. When the file name is the same as an existing file, the software will ask if that filemust be overwritten.