Program Delivery Plan

SECTION 7. SUPERVISORY CONTROL AND DATA ACQUISITION (SCADA)
some pump stations also requiring new controllers to be able to communicate with the
SCADA equipment.
3) PM will develop a plan to connect pump stations being replaced/added in the Program
to the SCADA system. Instructions will be provided to the design engineers for PDP
projects to allow for connection of these stations to the SCADA system in the future by
4 th quarter 2010.
4) PM will develop a project definition to implement a SCADA system at the North
WWTP. This project definition will be completed in 2014 in conjunction with the overall
North WWTP Master Plan project.
5) PM will prepare plans and specifications for the SCADA Operations Data/Control
Center and collection system SCADA components (both PDP and non-PDP stations) in
2010. This project will be ready to bid for construction in early 2011.
6) PM or a design engineer will prepare plans and specifications for the North WWTP
SCADA at a date to be determined.
With this project delivery plan, the collection system and the South WWTP will have a
SCADA system by the end of the Program (December 31, 2014). The North WWTP SCADA
system will not be implemented prior to the end of the Program, since it is a Master Plan
issue, not a wet weather issue. The timeline for construction of the North WWTP SCADA
system will be dependent on the available funding.
GNV31031158555.DOCX/103470008 7-5 JANUARY 2011
REV. 5