SAE 2016 WORLD CONGRESS & EXHIBITION

TECHNICAL SESSIONS
TIME
WEDNESDAY, APRIL 13 - AFTERNOON
Technical and Business Sessions
SESSION TITLE, DESCRIPTION, AND ROOM
250 A 250 C 413 A
Fatigue Modeling / Testing & CAE
Durability Analysis (Part 2 of 4) (M200)
Focuses on innovative and improved fatigue
methodologies and problem-solving techniques on
automotive components, assemblies and vehicles
based on material characterization, testing and CAE
(Computer Aided Engineering) analysis.
1:00 p.m. - 4:00 p.m.
Load Simulation and Vehicle
Performance: Nonlinear Components/
Systems (Part 2 of 2) (M206)
Focusing on new theory, formulation and modeling of
amplitude-, frequency- and temperature-dependent
nonlinear components/systems such as mounts
or bushings, shock absorbers, and joint friction/
damping; dynamic characterization through lab
and field testing; Linearization methodology; Model
validation, application, and sensitivity analysis in
vehicle system/subsystem simulations; Nonlinear
system identification, modeling, and application in
testing accuracy improvement, etc.
1:00 p.m. - 2:30 p.m.
MATERIALS
NVH CAE Analysis & Testing Correlations
(M211)
This session covers the development and application
of numerical methods along with test correlation and
optimization for NVH issues of full vehicle and vehicle
subsystems. All structural components, subsystems
and complete systems found in automotive vehicles
will be considered. Topics include structure NVH,
vibro-acoustics, wind noise and aeroacoustics,
intake/exhaust and vehicle interior noise, sound
quality etc.
1:00 p.m. - 4:30 p.m.
1:00
p.m.
1:30
p.m.
2:00
p.m.
2:30
p.m.
3:00
p.m.
3:30
p.m.
4:00
p.m.
Organizers:
Abolhassan Khosrovaneh, GM; John J. Bonnen, Ford
Motor Company; Guofei Chen, United States Steel
Corp.; Carlos Carvalho Engler-Pinto, Ford Motor
Company; Mingchao Guo, FCA US LLC; Zhigang
Wei, Tenneco Inc.
Fatigue Life Prediction of an Automotive Chassis
System with Combined Hardening Material Model
Organizers:
Fulun Yang, Tenneco Inc.; Guangqiang Wu, Tongji
Univ.; Peijun Xu, Ebco Inc.
Non-Linear Bifurcation Stability Analysis for
Articulated Vehicles with Active Trailer Differential
Braking Systems
(2016-01-0378) (2016-01-0433) (Oral Only)
John George, Daniel Gross, Honda R&D Americas,
Inc.; Hamid Jahed, Ali Roostaei, University of
Waterloo
Fatigue Life Prediction of Friction Stir Linear Welds for
Magnesium Alloys
(2016-01-0386) (2016-01-0429)
HongTae Kang, University of Michigan; Abolhassan
Khosrovaneh, General Motors Co.; Xuming Su,
Ford Motor Company; Mingchao Guo, Yung-Li Lee,
FCA US LLC; Shyam Pittala, University of Michigan;
Chonghua Jiang, AET Integration Inc.; Brian Jordon,
University of Alabama
Modern Methods for Random Fatigue of Automotive
Parts
Tao Sun, Eungkil Lee, Yuping He, University of
Ontario Institute of Technology
Load Identification of a Suspension Assembly Using
True-Load Self Transducer Generation
Paul Augustine, University of Wisconsin; Timothy
Hunter, Wolf Star Technologies LLC; Nathan Sievers,
Xiaoru Guo, University of Wisconsin
(2016-01-0372) (2016-01-0479)
Thomas Thesing, Hella KGaA Hueck and Co.; Neil
Bishop, CAEfatigue, Ltd.
Review and Assessment of Frequency-Based Fatigue
Damage Models
(2016-01-0369) (2016-01-0476)
John P. Quigley, General Dynamics Land Systems;
Yung-Li Lee, Liang Wang, FCA US LLC
Critical Plane Analysis of Rubber Bushing Durability
Under Road Loads
(2016-01-0393) (2016-01-0473)
Kevin P. Barbash, General Motors; William V. Mars,
Endurica LLC
Organizers:
Weiguo Zhang, FCA US LLC; Guangtian Gavin Song,
Ford Motor Company; Nammalwar Purushothaman,
BAE Systems; Luohui Long, Ford Motor Company;
Wen Li, Wayne State Univ.
Chairpersons:
Weiguo Zhang, FCA US LLC; Guangtian Song, Ford
Motor Company
Technical Keynote: A Comprehensive Sound Source
Localization and Analysis Technology
Sean F. Wu, Wayne State Univ.; Yazhong Lu, Signal-
Wise LCC
Indoor Pass-by Noise Evaluation System Capable of
Reproducing ISO Actual Road Surface Tire Noise
Kuniaki Goto, Takashi Kondo, Masakiyo Takahira,
Eiji Umemura, Masashi Komada, Toyota Motor
Corporation; Yasuhiko Nishimura, Brüel and Kjær
On the Effect of Friction Law in Closed-Loop
Coupling Disc Brake Model
Yongchang Du, Yingping Lv, Yujian Wang, Tsinghua
Univ.; Pu Gao, Beijing Institute of Technology
An Investigation of Body Inertance Response for
Occupant Safety Control Module Attachment
Regions
Muthukumar Arunachalam, S Arunkumar, FCA
Engineering India Pvt Ltd; PraveenKumar Sampath,
EinNel Technologies; Abdul Haiyum, FCA Engineering
India Pvt Ltd; Beverly Katz, FCA US LLC
Prediction of Fretting Fatigue in Engine Cylinder Block
Sound Absorption Performance Prediction of
Automotive Porous Sound Package by Using Genetic
Algorithm
(2016-01-0382) (2016-01-0472)
Chao Shi, Kenji Sato, Takeru Hamakawa, Yoshimichi
Ishihara, Shinichi Takahashi, Honda R&D Co. Ltd.
Planned by Materials Modeling and Testing
Committee / Materials Engineering Activity
Planned by Materials Modeling and Testing
Committee / Materials Engineering Activity
Lianhui Wang, Shuming Chen, Dengfeng Wang, Yang
Jiang, Jing Chen, Jilin University
A Study on Robust Air Induction Snorkel Volume
Velocity Prediction Using DFSS approach
(2016-01-0480)
Weiguo Zhang, Mark Likich, Mac Lynch, FCA US
LLC; John White, Altair ProductDesign
Planned by Materials Modeling and Testing
Committee / Materials Engineering Activity
SAE 2016 World Congress 115