SAE 2016 WORLD CONGRESS & EXHIBITION
1TOYf5Y
1TOYf5Y
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TECHNICAL SESSIONS<br />
TIME<br />
PROPULSION/POWERTRAIN<br />
TUESDAY, APRIL 12 - MORNING<br />
Technical and Business Sessions<br />
SESSION TITLE, DESCRIPTION, AND ROOM<br />
411 B 413 B 411 A 414 A<br />
Combustion in Compression-<br />
Ignition Engines: In-Cylinder<br />
Processes (Part 1 of 2) (PFL222)<br />
Papers focusing on in-cylinder processes<br />
of classical diesel engine combustion with<br />
relatively short ignition delay, including<br />
papers dealing with low compression<br />
ratio and high exhaust-gas recirculation<br />
calibrations. Subject matter may include<br />
both simulation results and experimental<br />
work, including applications of optical<br />
diagnostics, with emphasis on in-cylinder<br />
spray, evaporation, mixing, pollutant<br />
formation/destruction, or any other incylinder<br />
phenomena.<br />
9:30 a.m. - 11:00 a.m.<br />
Diagnostic Development<br />
(PFL150)<br />
This session focuses on engine combustion<br />
and flow diagnostic development and<br />
demonstration. Examples of diagnostics of<br />
interest include, but are not limited to: LIF,<br />
PLIF, absorption/emission spectroscopy, ion<br />
probes, pressure sensors, and extractive<br />
and exhaust gas composition sensors.<br />
9:30 a.m. - 12:30 p.m.<br />
Dual Fuel Combustion Processes<br />
(Part 1 of 2) (PFL261)<br />
Mixed mode using more than one fuel<br />
not fully mixed before combustion. Most<br />
often with auto ignition of spray injected<br />
late. Papers describing experiments and<br />
test data, simulation results focused on<br />
applications, fuel/additive effects, and RCCI<br />
(Reactivity-Controlled Compression Ignition)<br />
are invited and will be placed in appropriate<br />
sub-sessions. Papers with an emphasis on<br />
the modeling aspects of combustion are<br />
encouraged to be submitted into PFL110 or<br />
PFL120 modeling sessions.<br />
9:30 a.m. - 11:30 a.m.<br />
Fluid flow Measurement &<br />
Analysis (PFL140)<br />
The focus of this session is the<br />
measurement and analysis of in-cylinder<br />
and port flows in research and production<br />
engines. Topics may including PIV, PTV,<br />
LDV, and fluorescent tracer measurements<br />
of velocity and turbulence characteristics<br />
and modeling analysis of engine flows.<br />
9:30 a.m. - 11:00 a.m.<br />
Organizers:<br />
Jose M Garcia-Oliver, Universidad<br />
Politecnica de Valencia; Song-Charng<br />
Kong, Iowa State University; Robert M.<br />
McDavid, Caterpillar Inc.; Mark P. B.<br />
Musculus, Sandia National Laboratories;<br />
Raul Payri, Universitat Politecnica de<br />
Valencia; Dale R. Tree, Brigham Young Univ.<br />
Organizers:<br />
Matthew J. Hall, Univ. of Texas-Austin;<br />
Oivind Andersson, Lund University;<br />
Benjamin Petersen, Ford Motor Company<br />
Organizers:<br />
Scott Curran, Oak Ridge National<br />
Laboratory; Antonio Garcia, CMT Motores<br />
Termicos Universidad; Andrew Ickes,<br />
Argonne National Laboratory; Sage<br />
Kokjohn, University of Wisconsin - Madison;<br />
Benjamin Lawler, Stony Brook Univ.; William<br />
F. Northrop, University of Minnesota<br />
Organizers:<br />
Matthew J. Hall, Univ. of Texas-Austin;<br />
Oivind Andersson, Lund University;<br />
Benjamin Petersen, Ford Motor Company<br />
Chairpersons:<br />
Song-Charng Kong, Ryan M. Ogren, Iowa<br />
State Univ.<br />
12:00<br />
p.m.<br />
High-Speed Imaging of Early Flame Growth<br />
in Spark-Ignited Engines Using Different<br />
Imaging Systems via Endoscopic and Full<br />
Optical Access<br />
(<strong>2016</strong>-01-0644)<br />
Syahar Shawal, Martin Goschutz, Martin<br />
Schild, Sebastian Kaiser, University of<br />
Duisburg-Essen; Marius Neurohr, Juergen<br />
Pfeil, Thomas Koch, KIT Karlsruhe Institute<br />
of Technology<br />
Planned by Engine Combustion /<br />
Powertrain Fuels and Lubricants Activity<br />
Planned by General Powertrain<br />
Development / Powertrain Fuels and<br />
Lubricants Activity<br />
Planned by Engine Combustion /<br />
Powertrain Fuels and Lubricants Activity<br />
Planned by General Powertrain<br />
Development / Powertrain Fuels and<br />
Lubricants Activity<br />
POWERTRAIN/DRIVETRAIN<br />
Essential events for professionals involved with powertrain and drivetrain technologies.<br />
go.sae.org/powertrain.events<br />
<strong>SAE</strong> <strong>2016</strong> Commercial Vehicle<br />
Engineering Congress<br />
October 4-6, <strong>2016</strong><br />
Rosemont, Illinois, USA<br />
<strong>SAE</strong> <strong>2016</strong> All-Wheel Drive<br />
Symposium<br />
October 17-19, <strong>2016</strong><br />
Ypsilanti, Michigan, USA<br />
<strong>SAE</strong> <strong>2016</strong> Transmission<br />
and Driveline Technologies<br />
Symposium<br />
October 17-19, <strong>2016</strong><br />
Ypsilanti, Michigan, USA<br />
<strong>SAE</strong> <strong>2016</strong> International<br />
Powertrain, Fuels & Lubricants<br />
Meeting<br />
October 24-26, <strong>2016</strong><br />
Baltimore, Maryland, USA<br />
P160265<br />
<strong>SAE</strong> <strong>2016</strong> World Congress 129