SAE 2016 WORLD CONGRESS & EXHIBITION

TECHNICAL SESSIONS
TIME
WEDNESDAY, APRIL 13 - MORNING
Technical and Business Sessions
SESSION TITLE, DESCRIPTION, AND ROOM
252 A 259
Particle Emissions from Combustion
Sources (Part 1 of 2) (PFL450)
This session deals with particle emissions from
combustion engines, including measurement and
testing methods, and the effects of changes in
fuel composition. Topics include the environmental
and health effects of elemental carbon and organic
carbon that constitutes solid cored particles plus
the environmental and health effects of secondary
organic aerosol emissions. This includes particulate
emissions from both gasoline and diesel engines.
8:00 a.m. - 11:30 a.m.
EMISSIONS/ENVIRONMENT/
SUSTAINABILITY
Thermal Systems Modeling and
Simulation (Part 2 of 5) (HX102)
The Thermal Systems Modeling and Simulation
session focusses on state of the art simulation
technologies for modeling thermal systems and their
application in the development and optimization of
vehicle thermal management and fuel economy. The
papers in the session will range from empirical, 1D
modeling methods to three dimensional CFD models
as well as coupled methods.
8:00 a.m. - 11:30 a.m.
8:00
a.m.
8:30
a.m.
9:00
a.m.
9:30
a.m.
10:00
a.m.
10:30
a.m.
11:00
a.m.
Organizers:
Imad A. Khalek, Southwest Research Institute;
Amanda Lea-Langton, Univ. of Leeds; Matti Maricq,
Ford Motor Company; Andrea Strzelec, Texas A&M
University
Combustion and Emission Characteristics of a Heavy
Duty Engine Fueled with Two Ternary Blends of
N-heptane/Iso-octane and Toluene or Benzaldehyde
(2016-01-0998) (2016-01-0213)
Shuli Wang, Xinda Zhu, L.M.T. Somers, L.P.H. de
Goey, Eindhoven University of Technology
Effects of Spray Droplet Size and Velocity
Distributions on Emissions from a Single Cylinder
Biofuel Engine
(2016-01-0994) (2016-01-0221)
Chetankumar Patel, Nikhil Sharma, Nachiketa
Tiwari, Avinash Kumar Agarwal, Indian Institute of
Technology Kanpur
Optimized On-board PM Analyzer Consisting of
Real-time Diffusion Charger Sensor and Particulate
Sampler
(2016-01-0993) (2016-01-0217)
Yoshinori Otsuki, Kenji Takeda, Hiroshi Nakamura,
Horiba Ltd.
Particulate Emissions in GDI Vehicle Transients:
An Examination of FTP, HWFET, and US06
Measurements
(2016-01-0992) (2016-01-0208)
Justin Koczak, Andre Boehman, University of
Michigan; Matthew Brusstar, US Environmental
Protection Agency
Volatility Characterization of Nanoparticles from Diesel
Low Temperature Combustion Modes
(Oral Only) (2016-01-0227)
William F. Northrop, Glenn Lucachick, Univ
of Minnesota-Twin Cities; Scott Curran, Vitaly
Prikhodko, John Storey, Oak Ridge National
Laboratory
Very Low PM Mass Measurements: Results from the
CRC E-99 project
(Oral Only) (2016-01-0216)
Jian Xue, University of California, Riverside; Heejung
Jung, Univ. of California-Riverside; Kent Johnson,
Univ of California-Riverside; Jacob Swanson,
Minnesota State University, Mankato; David Kittelson,
Univ of Minnesota-Twin Cities; Thomas Durbin, Univ
of California-Riverside
Physio-Chemical Characterization of Particulate
Matter from a Reactivity Controlled Compression-
Ignition Combustion on a Multi-Cylinder Light-Duty
Engine
(Oral Only) (2016-01-0212)
John M. Storey, Scott Curran, Adam Dempsey,
Samuel Lewis, James Parks, Vitaly Prikhodko, Oak
Ridge National Laboratory
Planned by Exhaust Aftertreatment and Emissions
Committee / Powertrain Fuels and Lubricants Activity
Organizers:
Ales Alajbegovic, Exa Corporation; Alaa El-Sharkawy,
FCA US LLC; Wilko Jansen, Jaguar & Land Rover;
Jason Aaron Lustbader, National Renewable Energy
Laboratory; Gursaran D. Mathur, CalsonicKansei
North America Inc.; Kumar Srinivasan, FCA US LLC;
Sudhi Uppuluri, Computational Sciences Experts
Group
Modelling of Car Cabin Thermal Behaviour during
Cool Down, Using an Advanced CFD/Thermal
Approach
Andrea Alessandro Piovano, Laura Maria Lorefice,
Giuseppe Scantamburlo, FCA Italy S.p.A.
Validation of a CFD Model to Predict R-1234yf
Concentrations in a Vehicle Cabin Compartment
Roberto Monforte, Fabrizio Mattiello, Andrea
Perosino, CRF S.C.p.A.; Fabrizio Porta, FCA Italy
S.p.A.; Susanna Paz, Pablo Lopez del Rincón,
Applus IDIADA Spain
Design and Development of Demisting Device of
a Commercial Vehicle and its Numerical as well as
Experimental Validation
Somnath Sen, Mayur Selokar, Diwakar Nisad, Kamal
Kishore, Subros Limited
Numerical Investigation of Geometry Effects on Flow,
Heat Transfer and Defrosting Characteristics of a
Simplified Automobile Windshield with a Single Row
of Impinging Jets
Xuzhi Du, Zhigang Yang, Hua Zhou, Qiliang Li,
Zheyan Jin, Tongji University
Scaling Model of Heat Exchangers in Automotive Air
Conditioning Systems
Kaushal Kumar Jha, Imran Shaik, Mahindra &
Mahindra Ltd.
Automotive LED Headlamp Defogging: Experimental
and Numerical Investigation
Ramanand Singh, Remesh Kuzhikkali, Nitesh Shet,
Sekarapandian Natarajan, SABIC Tech Center;
Govind Kizhedath, SABIC; Murugan Arumugam,
SABIC Tech Center
Thermal design & analysis of Spacecraft for lunar
descent and surface operations.
Paras Kaushal, Satishchandra C. Wani, Axiom
Research Labs Private Limited
Planned by Thermal Management Activity / EMB
Land and Sea Group
SAE 2016 World Congress 79