SAE 2016 WORLD CONGRESS & EXHIBITION

TECHNICAL SESSIONS
TIME
EMISSIONS/ENVIRONMENT/
SUSTAINABILITY
THURSDAY, APRIL 14 - MORNING
Technical and Business Sessions
SESSION TITLE, DESCRIPTION, AND ROOM
251 C 252 A 252 B 313 A
Emission Control Modeling (Part 1
of 2) (PFL430)
Papers cover exhaust aftertreatment system
models, as well as their validation and
application. Technologies encompassed
include DOC, HC Trap, DPF, GPF, LNT,
TWC, SCR, SCRF, ammonia oxidation
catalysts, hybrid or combined catalysts,
urea-water solution spray dynamics, and
mixture non-uniformity. Modeling aspects
range from fundamental, 3D models
of individual components to system
level simulation, optimization, variation,
degradation, and control.
8:00 a.m. - 11:30 a.m.
Gaseous Engine Emissions (Part 1
of 2) (PFL460)
Combustion engine gaseous emissions
(regulated and non-regulated). Includes
well-to-wheels CO2 production for
alternative technologies, fuel economy
and GHG emission research with focus on
engine, emissions, fuels, control or related
components or sub-components. Also
includes hydrocarbon and specific NOx
species production over aftertreatment
devices resulting from changes in fuel
specification and the inclusion of bioderived
components and consideration of
secondary aftertreatment emissions.
8:00 a.m. - 9:30 a.m.
On-board Measurement and
Control (PFL425)
This technical session will focus on
internal combustion engine emissions
on board measurement and control.
Papers and presentations will cover
topics that discuss varying methods of
emissions data collection and control
during operation of vehicles and engines.
Topics will also include various advanced
analysis techniques to determine emissions
levels and reduce emissions under in-use
operations.
8:00 a.m. - 10:00 a.m.
Sustainable and Energy Efficient
Manufacturing (SDP109)
This session addresses research
and development in energy efficient
manufacturing relevant to the transportation
industry. Topics include but are not
limited to energy efficient manufacturing
technologies and best practices for
established manufacturing methods. In
addition, the session examines innovative
design and modeling techniques relevant
to energy systems employed in automotive
manufacturing.
8:00 a.m. - 9:00 a.m.
8:00
a.m.
8:30
a.m.
9:00
a.m.
9:30
a.m.
10:00
a.m.
10:30
a.m.
Organizers:
Christopher Depcik, Univ. of Kansas;
Maruthi Devarakonda, General Electric
Company; Thomas McKinley, Cummins
Inc.; Vincenzo Mulone, Univ. Of Roma Tor
Vergata; Achuth Munnannur, Cummins Inc.;
Balaji Sukumar, Johnson Matthey ECT
Sulfur Poisoning of a NO x
Storage Catalyst -
A Comprehensive Modelling Approach
Organizers:
Mansour Masoudi, Emissol LLC; Rachel
L. Muncrief; Behnam Bahrami, Krishna
Kamasamudram, Cummins Inc.; Siddiq
Khan, ACEEE
Exhaust Emissions of Gaseous and Solid
Pollutants Measured over the NEDC,
FTP-75 and WLTC Chassis Dynamometer
Driving Cycles
Organizers:
Shouxian Ren, General Motors LLC; Hui Xu,
Cummins Inc.
Real-world emissions measurement using
PEMS. A case study of more than 1000
on-road tests.
Organizers:
Deepak Gupta, Wichita State University;
Bhaskaran Gopalakrishnan, West Virginia
Univ.
Chairpersons:
Deepak Gupta, Wichita State University
Development of Paint Booth : New Paint
Mist Collection Method
(2016-01-0964) (2016-01-1008) (Oral Only) (2016-01-1258)
Klaus Hadl, Reinhard Ratzberger, Helmut
Eichlseder, Graz University of Technology;
Martin Schuessler, Waldemar Linares,
Hannes Pucher, AVL List GmbH
Piotr Bielaczyc, Joseph Woodburn, Andrzej
Szczotka, BOSMAL Automotive R & D
Institute
Nick Molden, Emissions Analytics
Tatsuya Iida, Hiroya Mitani, Mamoru Sato,
Toyota Motor Corporation
Robust, Cost-Optimal and Compliant
Engine and Aftertreatment Operation using
Air-path Control and Tailpipe Emission
Feedback
Cold running NOx emission comparison
between conventional and hybrid
powertrain configurations using real world
driving data
On Road Durability and Performance Test of
Diesel Particulate Filter with BS III and BS IV
Fuel for Indian Market
(2016-01-0961) (2016-01-1010) (2016-01-0959) (Oral Only)
Satish Narayanan Ramachandran, Gillis
Hommen, Paul Mentink, Xander Seykens,
Frank Willems, Frank Kupper, TNO
Automotive
Modeling of catalyzed particulate filters
concept phase simulation and real-time
plant modeling on HiL
Roberto Aliandro Varella, Instituto Superior
Técnico (IST); Gonçalo Gonçalves, Gonçalo
Duarte, IDMEC - IST; Tiago Farias, Instituto
Superior Técnico (IST)
Detailed Characterization of Criteria
Pollutant Emissions from D-EGR ® Light
Duty Vehicle
(2016-01-0969) (2016-01-1006) (2016-01-0958)
Johann C. Wurzenberger, Sophie
Bardubitzki, Susanne Kutschi, Robert
Fairbrother, Christoph Poetsch, AVL LIST
GmbH
Catalytic Soot Oxidation: Effect of Ceria-
Zirconia Catalyst Particle Size
Cary Henry, Svitlana Kroll, Vinay Premnath,
Ian Smith, Peter Morgan, Imad Khalek,
Southwest Research Institute
(2016-01-0968) (2016-01-0957)
Athanasios G. Konstandopoulos, CERTH/
CPERI and Aristotle University; Chrysoula
Pagkoura, Souzana Lorentzou, Georgia
Kastrinaki, CERTH/CPERI
Investigation of diesel particulate dendrite
bridge formation in surface pores through
electron microscopic visualization and
diffusion limit aggregation modeling
(Oral Only)
Ryoko Sanui, Katsunori Hanamura, Tokyo
Institute of Technology
Evaluation and Prediction of Deposit
Severity in SCR Systems
(2016-01-0970)
Henrik Smith, Thomas Lauer, Vienna
University of Technology; Viktor Schimik,
Klaus Gabel, AUDI AG
Dhinesh Kumar, Ashwhanth Raju, Nitin
Sheth, Mercedes-Benz R&D India Pvt. Ltd.;
Steffen Digeser, Daimler AG
Degradation of DeNOx Performance of a
Urea SCR System in In-use Heavy-duty
Vehicles Complying with the New Longterm
Regulation in Japan and Estimation of
its Mechanism
Kenichiroh Koshika, National Traffic Safety
and Environment Laboratory; Nobuya
Iwami, Takayuki Ichikawa, Tokyo Roki, Co.
, Ltd.; Hisakazu Suzuki, Toshiro Yamamoto,
Yuichi Goto, National Traffic Safety and
Environment Laboratory; Masakazu
Iwamoto, Chuo University
Analysis and Choice of Input Candidates
for a Virtual NO x
Sensor by a Mutual
Information Approach
Patrick Schrangl, Roman Schmied, Stephan
Stadlbauer, Harald Waschl, Luigi del Re,
Johannes Kepler University Linz; Bernhard
Ramsebner, Christoph Reiter, BMW
Motoren GmbH
Optimization of Extraction Process Using
N-Hexane Solvent for Mangifera Indica Oil
Production from Mangifera Indica Curcas
Sangram Jadhav, Madhukar Tandale, Dr.
Babasaheb Ambedkar Tech. University
continued on next page
SAE 2016 World Congress 83