SAE 2016 WORLD CONGRESS & EXHIBITION

TECHNICAL SESSIONS
TIME
Load Simulation and Vehicle
Performance: Tire and Terrain
(M208)
THURSDAY, APRIL 14 - AFTERNOON
Technical and Business Sessions
SESSION TITLE, DESCRIPTION, AND ROOM
MATERIALS
357 313 A 250 B 312 A
Focusing on tire and terrain mechanics
modeling for load simulations, tire model
development, parameters identification, and
sensitivity analyses, tire test development,
road profile characterization, effective
road profile development, and interactions
between tire, suspension/steering/brake
systems, and different terrains, spindle
loads/travel variation characteristics
from deterministic and rough roads,
terramechanics, tire noise, rolling resistance
and correlation studies.
1:00 p.m. - 3:30 p.m.
Materials and Residual Stress
Test Development (M205)
Key words: residual stress, retained
austenite, x-ray diffraction, neutron
diffraction, induction hardening, carburizing,
shot peening, quench and template,
residual stress simulation, residual stress
test
1:00 p.m. - 4:00 p.m.
Optical Measurement and
Nondestructive Testing
Techniques in Automotive
Engineering (M204)
Key words: optical techniques; digital
correlation; holography; shearography;
nondestructive testing
1:00 p.m. - 4:30 p.m.
Sheet Metal Forming Technology
(Part 2 of 2) (M105)
This session will feature the latest
developments in sheet metal forming
technology. Presentations will address
general areas of forming processes,
formability issues and modeling. These
include forming processes (Stamping,
hydroforming, gas forming, high
temperature forming), formability Issues
(springback, edge cracking, stretch-bend
failures and fracture), Modeling (materials,
forming limits, failure criteria in various
deformation modes and process modeling
& optimization).
1:00 p.m. - 2:30 p.m.
Organizers:
Jianfeng Ma, Saint Louis University;
Mustafa Ali Arat, Delft Univ. of Technology;
Emmanuel O. Bolarinwa, Federal Highway
Administration; Xiaobo Yang, Oshkosh
Corporation
Organizers:
Xin Zhang, F.Tech. R&D North America Inc.;
Gerald A. Shulke, FCA US LLC; Xichen Sun
Organizers:
Sheng Liu, General Motors Co.; Kah
Wah Long, FCA US LLC; Lianxiang Yang,
Oakland Univ.
Organizers:
Thomas Oetjens, CAE Integration; Xiaoming
Chen, U. S. Steel Corp.; ZiQiang Sheng,
General Motors; Michael J. Worswick,
University of Waterloo; Dajun Zhou, FCA
US LLC
3:30
p.m.
Residual Stress Distributions in Rectangular
Bars due to High Rolling Loads
(2016-01-0424) (2016-01-0417)
Mohammed Yusuf Ali, University of
Michigan; Petr Michlik, Caterpillar Inc.; Jwo
Pan, University of Michigan
A New measurement of Aluminum Alloy
Edge Stretching Limit Based on Digital
Image Correlation Method
Wan Xu, Oakland University; Xinfeng Shi,
Tian Bai, Guobiao Yang, Lianxiang Yang,
Oakland Univ; Changqing Du, Dajun Zhou,
Yongjun Zhou, FCA US LLC
4:00
p.m.
Combined Synchrotron X-Ray Diffraction
and Digital Image Correlation Technique for
Measurement of Austenite Transformation
with Strain in TRIP-Assisted Steels
(2016-01-0419)
Whitney Poling, Colorado School of
Mines; Vesna Savic, Louis Hector, Anil
Sachdev, General Motors Co.; Xiaohua Hu,
Arun Devaraj, Pacific Northwest National
Laboratory; Fadi Abu-Farha, Clemson
University
Planned by Materials Modeling and Testing
Committee / Materials Engineering Activity
Planned by Materials Modeling and Testing
Committee / Materials Engineering Activity
Planned by Materials Modeling and Testing
Committee / Materials Engineering Activity
Planned by Metallic Materials Committee /
Materials Engineering Activity
122 SAE 2016 World Congress