SAE 2016 WORLD CONGRESS & EXHIBITION

TECHNICAL SESSIONS
TIME
THURSDAY, APRIL 14 - MORNING
Technical and Business Sessions
SESSION TITLE, DESCRIPTION, AND ROOM
312 A 356 250 A
Sheet Metal Forming Technology (Part 1
of 2) (M105)
This session will feature the latest developments
in sheet metal forming technology. Presentations
will address general areas of forming processes,
formability issues and modeling. These include
forming processes (Stamping, hydroforming, gas
forming, high temperature forming), formability Issues
(springback, edge cracking, stretch-bend failures and
fracture), Modeling (materials, forming limits, failure
criteria in various deformation modes and process
modeling & optimization).
8:00 a.m. - 11:00 a.m.
UV/EB Leading the Way for the Future of
Automotive (Part 1 of 2) (M401)
Success in cure technology attained through
advances photocurable materials, UV Laser
technology, lamp development, 3D computer
imaging, and the development of novel materials,
processes and facilities, are significantly advancing
the efforts of energy reduction and vehicle
lightweighting resulting in improvements of reduced
GHG emissions, manufacturing Cycle Time,
Small Footprint manufacturing, speedy proto-type
development and Additive Manufacturing, all creating
a revolution in manufacturing.
8:00 a.m. - 11:30 a.m.
MATERIALS
Fatigue Modeling / Testing & CAE
Durability Analysis (Part 3 of 4) (M200)
Focuses on innovative and improved fatigue
methodologies and problem-solving techniques on
automotive components, assemblies and vehicles
based on material characterization, testing and CAE
(Computer Aided Engineering) analysis.
8:30 a.m. - 11:30 a.m.
8:00
a.m.
8:30
a.m.
9:00
a.m.
9:30
a.m.
10:00
a.m.
10:30
a.m.
11:00
a.m.
Organizers:
Thomas Oetjens, CAE Integration; Xiaoming Chen,
U. S. Steel Corp.; ZiQiang Sheng, General Motors;
Michael J. Worswick, University of Waterloo; Dajun
Zhou, FCA US LLC
Prediction of Fracture in Warm/Hot Forming using
Strain Rate and Temperature Dependent Forming
Limit Surface
(Oral Only)
ZiQiang Sheng, General Motors
Study of the conical tip shape of piercing punch on
the dimension of punched hole
Organizers:
Gary Cohen, Radtech International North America;
Mary Ellen Rosenberger, BaySpring Solutions LLC;
Jian Tao, FCA US LLC
Chairpersons:
Gary Cohen, Radtech International North America;
Christopher Seubert, Ford Motor Company
One Component UV-A Automotive Refinish; Clear
Coats and Primers
(Oral Only)
Michael Dvorchak, Dvorchak Enterprises LLC
Cationic UV-curing of Automotive Coatings
(2016-01-0364) (Oral Only) (2016-01-0380)
Guobiao Yang, Oakland University,Tongji University;
Tian Bai, Wan Xu, Junrui Li, Lianxiang Yang, Oakland
University; Dajun Zhou, Changqing Du, FCA US LLC
Investigation of Plastic Anisotropy in Various Sheet
Metals under Uniaxial and Biaxial Loading Conditions
Cynthia Templeman, Toyota Motor Engineering &
Mfg NA Inc.
Advancements in Coating Technology for Automotive
Plastic Components
Organizers:
Abolhassan Khosrovaneh, GM; John J. Bonnen, Ford
Motor Company; Guofei Chen, United States Steel
Corp.; Carlos Carvalho Engler-Pinto, Ford Motor
Company; Mingchao Guo, FCA US LLC; Zhigang
Wei, Tenneco Inc.
Assessment of Critical Plane Models Using Non-
Proportional Low Cycle Fatigue Test Data of 304
Stainless Steel
Ghassan Abed, Oakland University; Yung-Li Lee, Jian
Zhu, FCA US LLC
Probabilistic Isothermal, Anisothermal, and High-
Temperature Thermo-Mechanical Fatigue Life
Assessment and CAE Implementations
(Oral Only) (Oral Only) (2016-01-0370)
Fadi Abu-Farha, Nan Zhang, Clemson University
(CU-ICAR)
Eileen Weber, Red Spot Paint & Varnish Co. Inc. Zhigang Wei, Yunfei Qu, Dongying Jiang, Limin Luo,
Jason Hamilton, Kay Ellinghaus, Markus Pieszkalla,
Tenneco Inc.
Hot Blank Cold Die (HB-CD) Stamping of Aluminium
Alloy Sheets: Characterization, Modeling, Simulations
and Validation
Improving Weatherability of Energy Curable
Hardcoats
A Comparative Study of Automotive System Fatigue
Models Processed in the Time and Frequency
Domain
(Oral Only) (Oral Only) (2016-01-0377)
Nan Zhang, Fadi Abu-Farha, Clemson University
(CU-ICAR)
Marcus Hutchins, Allnex
Wallace Ferreira, Ford Brasil S. A.; Trenton Meehan,
Ford Motor Company; Valdir Cardoso, Valdirm
Cardoso; Neil Bishop, CAEfatigue, Ltd.
Tension-Compression Asymmetry in Advanced High
Strength Steels
Radiation Curable Components and Their Use in
Hard, Scratch Resistant Coating Applications
(Oral Only) (Oral Only) (2016-01-0389)
Jun Hu, Fadi Abu-Farha, Zeren xu, Clemson
University (CU-ICAR)
Edge Fracture Mechanism in Advanced High
Strength Steel
William Schaeffer, Steven Tyson, Indu Vappala,
Sartomer Usa LLC
Breaking the Paradigm in Silicone Processing:
Achieving Fast Room-Temperature Curing without
Sacrificing Pot-Life using ELASTOSIL® CAT UV
Technology
An Experimental Study on Static and Fatigue
Strengths of Resistance Spot Welds with Stack-up of
Advanced High Strength Steels and Adhesive
Mingchao Guo, Ramchandra Bhandarkar, Weidong
Zhang, FCA US LLC; Guofei Chen, Zhenke Teng,
United States Steel Corporation
Fatigue Life Prediction for Adaptable Insert Welds
between Sheet Steel and Cast Magnesium Alloy
(Oral Only) (Oral Only) (2016-01-0392)
Nikky Pathak, Cliff Butcher, Michael Worswick,
University of Waterloo
Dr. Jason Rouse, Wacker Chemical Corp.
HongTae Kang, University of Michigan; Abolhassan
Khosrovaneh, GM; Xuming Su, Ford Motor
Company; Mingchao Guo, Yung-Li Lee, FCA US
LLC; Sai Boorgu, University of Michigan; Chonghua
Jiang, AET Integration Inc.
Planned by Metallic Materials Committee / Materials
Engineering Activity
New Developments in UV Curable Laminating
Adhesives Formulating for Enhanced Adhesion and
Service Properties
Fatigue Evaluation Procedure Development for Self-
Piercing Riveted Joints Using the Battelle Structural
Stress Method
(Oral Only) (2016-01-0384)
Michael Bailey, Sartomer Usa LLC
Andrew Cox, Jeong Hong, Battelle
Planned by Polymers and Coatings Committee /
Materials Engineering Activity
Planned by Materials Modeling and Testing
Committee / Materials Engineering Activity
118 SAE 2016 World Congress