Views
8 months ago

GlassCatalogue_LowRes

Double Glazing

Double Glazing Components / Primary Sealants Tremco JS680 JS680 is a one-component polyisobutylene-based sealant, specially developed for the manufacture of insulated glass units. JS680 functions as the inner barrier or primary seal in dual-seal systems and should be used in conjunction with a secondary sealant of either polysulphide, polyurethane, hot melt butyl or silicone. JS680 is not suitable for the construction of IG units with flexible spacers. Features • Adheres to glass, aluminium, galvanised or stainless steel • Very low moisture and gas permeability - no fogging • Flexible at low temperatures • High ultraviolet resistance • Very easy to use Packaging: 1 kg, 2.4 kg and 7 kg cylinders Colour: Black Mylar® Tape Mylar® tape consists of a special laminate with a highperformance, pressure-sensitive acrylic adhesive on one side and protected by a release treated poly liner. The tape is used to seal the connecting joints on the Super Spacer® and utilises a special laminate that minimises the transmission of water vapour. Sizes: 30 lineal metre rolls PIB Strips PIB tape acts as an excellent barrier to moisture vapour and is required to be used in conjunction with all non-butyl secondary sealants for both the final corner and gas fill holes of insulated glass units. 100 Product Catalogue For Glass Processors & IG Manufacturers

Double Glazing Components / Secondary Sealants Kömmerling Ködimelt IG Ködimelt IG is a solvent-free, one-component, hotmelt, butyl-based sealant developed for the manufacture of insulated glass units. Ködimelt IG functions as a secondary seal in dual-seal systems and can be used in conjunction with a PIB primary sealant such as GD115. Features • Good adhesion to glass, aluminium and galvanised or stainless steel • Processing temperature with melting equipment +170°C to +180°C • Easy application with no loss of material or waste disposal issues • Flushing or purging of melting equipment is not necessary • Extremely low moisture vapour transmission rate and good gas retention Packaging: 6.5kg carton Colour: Black or grey Tremco JS334 JS334 is a solvent-free, one-component, hotmelt butylbased sealant specially developed for the manufacture of insulated glass units. JS334 functions as the outer barrier or secondary seal in either single or dual-seal systems. JS334 can be used in conjunction with a PIB primary sealant such as JS680 for dual-sealed units. Features • Excellent adhesion to glass, aluminium, galvanised steel and warm edge spacers • Very fast handling of insulating glass after cooling down (a few minutes) • Easy application with limited waste and no need for metering • No cleaning or purging of dispensing equipment required • Very low moisture vapour permeability Packaging: 6.5kg carton Colour: Black Email: info@fgtrading.co.za | Web: www.fgtrading.co.za 101