GlassCatalogue_LowRes

Surface Protection Products / Glass Protectors & Pads
FG-SA Cork Pads
FG-SA Cork Pads have self-adhesive PVC foam backing
on a protective plastic liner. The pads are applied to glass
surfaces to provide protection against scratching during
transportation and handling. The pads are easy to apply
and when removed will not leave any residue. Available in
sizes of 18mm x 18mm x 5mm.
FG-SB Cork Pads
FG-SB Cork Pads have transparent, low-tack adhesive film
backing. The pads are applied to glass surfaces to provide
protection against scratching during transportation and
handling. The pads are easy to apply and when removed
will not leave any residue. Available in sizes of 18mm x
18mm x 3mm.
Coloured PVC Foam Pads
Coloured PVC foam pads are used for the separation and
protection of flat sheets of glass during transport. The
pads have a transparent, low-tack, pressure-sensitive
adhesive film backing that allows clean removal from
glass surfaces leaving no residue or ghosting marks.
Available in sizes of 18mm x 18mm x 5mm.
Corner Protectors
Transparent, plastic devices to protect glass edges
during transportation, handling or storage. They will not
scratch or damage the glass surface, and provide reliable
protection against breakage. They are reusable, and
simply slide on or off the corners of the glass. Available in
different sizes for glass thicknesses from 3mm to 26mm.
194 Product Catalogue For Glass Processors & IG Manufacturers