GlassCatalogue_LowRes

Glass Handling Equipment / Positioning & Clamping Equipment
GTS Steel Hand Spring Clamps
These 120mm steel hand spring clamps can be used
for applying the required compression for a proper seal
in various applications such as assembly of curved
insulated glass units. The clamps are positioned around
the perimeter of the unit, evenly distributing the pressure
and ensuring a uniform seal. The maximum jaw opening
of each clamp is 30mm.
GTS Nylon Hand Spring Clamps
These 200mm nylon hand spring clamps can be used
for applying the required compression for a proper seal
in various applications such as assembly of curved
insulated glass units. The clamps are positioned around
the perimeter of the unit, evenly distributing the pressure
and ensuring a uniform seal. The maximum jaw opening
of each clamp is 60mm.
GTS 60mm Angled Suction Cup
The GTS 60mm Angled Suction Cup is a double suction cup clamp adjustable
between 60° and 240° to secure glass panels in place during UV bonding. The
60mm rubber suction pads hold glass panels firmly in place until they are
bonded - the device should NOT be used for carrying.
Features
• Holds glass sheets on either inside or outside surface
• Height and position can be adjusted by up to 8mm
using the knobs located on each arm
Loading capacity: N/A
Email: info@fgtrading.co.za | Web: www.fgtrading.co.za
149