GlassCatalogue_LowRes

Glass Handling Equipment / Powered Lifting Systems
GMS SD2.MR
The GMS SD2.MR is a two suction cup device for lifting glass
sheets with minimum dimensions of 300mm x 700mm and a
maximum weight of 180kg. The light, practical device can be
manually rotated by 360° in increments of 90°. The vacuum
installation comprises an electric, independent pump and
two safety circuits.
Specifications
Weight (mass)
46kg
Min. glass sheet dimensions
300mm x 700mm
Max. lifting capacity
180kg
No. of suction cups 2
Movements
Manual rotation
GMS SD2.DG.PR
The GMS SD2.DG.PR is a two suction cup device for lifting single
glass sheets or double glazed units with minimum dimensions
of 300mm x 600mm and a maximum weight of 180kg. The
pneumatic device features powered rotation by 90° and is
ideally suited for the loading/unloading of double glazing
production lines. Rotation and up and down movements are
controlled via the two gripping handles
Specifications
Weight (mass)
50kg
Min. glass dimensions
300mm x 600mm
Max. lifting capacity
180kg
No. of suction cups 2
Movements
Powered rotation
160 Product Catalogue For Glass Processors & IG Manufacturers