GlassCatalogue_LowRes

Glass Processing Machinery / Cutting Tables & Lines
Macotec Strato Active 3.7
The Strato Active 3.7 is an automatic cutting
table for laminated glass with a PVB cutting
blade which provides glass separation
control. The technologically-advanced
machine features exceptional ergonomics,
a rapid working cycle, high-precision
recirculating ball bearings, self-adjusting
working parameters and an on-board
optimiser.
Features
• Optimisation software, installed on board, with graphic visualization of working steps
• Squaring up to zero and equipped with a “peripheral” wheel for Low-E edge deletion
• Glass separation is controlled by a brushless motor to avoid any risk of delamination
• Automatic execution of trimming up to 6.5 cm for optimisation and waste reduction
• Trimmings are automatically removed from the cutting area and transported away
Specifications
Max. workable glass sheet sizes
3700mm
Cutting speed
110m/min.
Min. glass thickness
3/0.38/3mm
Max. glass thickness
8/4.56/8mm
Squaring
Manual (automatic)
Min. squaring 150mm (0)
Max. squaring
3210mm
No. of squaring pads 3
Minimum trimming
65mm
Max. installed power
24Kw
No. of tilting arms 3
Email: info@fgtrading.co.za | Web: www.fgtrading.co.za
015