GlassCatalogue_LowRes

Test Equipment & Instruments / Glass Evaluation
GTS Low-E Coating Detector
The GTS Low-E Detector is an easy-to-use tool that detects
Low-E surface coatings on glass. The detector is a valuable tool
to use in the production environment to confirm the orientation
of the Low-E glass. The detector is powered by a 9-Volt alkaline
battery, that is long-lasting and easily replaceable.
CRL CD1 Coating Detector
The CRL CD1 is a conductive Low-E coating detector which
provides positive identification of the coated side of glass upon
direct contact with the glass surface. This tool will prove itself
invaluable to insulating glass fabricators who need to verify
coatings and assure correct assembly procedures.
Features
• Verifies that no Low-E surface is inadvertently exposed
• Edge stops limit scratching in centre viewing area
• Red indicator lights up on contact with Low-E
• Small enough to fit in your shirt pocket
CRL CD2 Coating Detector
The CRL CD2 is a non-contact Low-E coating detector that is
a durable, dependable tool for use by fabricating, sales and
service personnel who need to verify the presence of Low-E
glass coatings. The CD2 is placed against the glass surface and
the button is pushed to activate.
Features
• Assures various professionals that coating is present
• Visual red LED indicator and audible signal on finding
• Slips comfortably into shirt pocket or briefcase
210 Product Catalogue For Glass Processors & IG Manufacturers