GlassCatalogue_LowRes

Sealant Pumps / Mixing & Metering Units
GMS 2K Sealant Pump
The GMS 2K Sealant Pump is a
pneumatic, two-component mixing
unit. The robust pump has a dedicated
mix ratio station which is used to verify
the ratio of both the Part A and Part
B components. In order to flush the
system to prevent blockages the pump
can base purge or alternatively a purge
pump can be fitted which will minimise
wastage of material as the purging is
carried out with GMS solvent.
Usage
The GMS 2K Sealant Pump can be used for the extrusion of two-component sealants
such as silicones, polyurethanes and polysulphides. Optional equipment includes a
heated following plate for the Part A component, single trolley base or purge pump.
Specifications
Dimensions (l x w x h)
Standard swivel arm length
Standard hose length
Weight
Maximum outflow
A-side power
B-side power
Compressed air requirement
1100mm x 1100mm x 1800mm
1900mm
2600mm
400kg
2800g/min.
Pneumatic
Pneumatic
6 bar, 12mm internal diameter hose
Email: info@fgtrading.co.za | Web: www.fgtrading.co.za 131