GlassCatalogue_LowRes

Glass Handling Equipment / Loading & Transportation Equipment
GMS GG Series
The GMS GG Series consists of mechanical glass grabs
that can be applied to a sheet lifting device. The glass
grabs are available in three versions: GG 3/12, GG 3/16
and GG 3/25 all of which have a minimum clamping
thickness of 3mm and a maximum of 12mm, 16mm and
25mm respectively. The GG 3/12 and GG 3/16 can lift
glass sheets with a weight of up to 500kg while the GG
3/25 has a maximum capacity of 1000kg.
GMS UD30
The GMS UD30 is an unloading device for the handling
of glass packs or glass sheets with a maximum weight
of 3000kg. The device is provided with lower supports
and side and upper brackets. All of the brackets and
supports are easily adjustable.
A-Frame Glass Rack
A double-sided, transport and trolley rack for the
safe transport and storage of windows, flat glass or
insulating glass units. The rack is equipped with vertical
compounded supporting elements for maximum
strength and stability and features a removable trolley
base for installation in truck beds.
FGT Webbing
Webbing can be used to create tie downs for securing
large, heavy or awkward loads during transportation as
it has a high break strength. The webbing can be used
for tying down loads on a truck as well as securing flat
glass, windows or insulating glass units to a glass rack.
152 Product Catalogue For Glass Processors & IG Manufacturers