GlassCatalogue_LowRes

Glass Handling Equipment / Positioning & Clamping Equipment
GTS 117mm Angled Suction Cup
The GTS 117mm Angled Suction Cup is a double suction cup connected by a rotatable
link, adjustable between 45° and 300° for application to glass during construction - the
suction cups can be adjusted precisely to the desired position and clamped tightly in
place. The device should NOT be used for carrying.
Features
• Spare handles, springs and pads available
• Supplied with protective covers on pads
Loading capacity: N/A
GTS Roller Blocks
Roller Blocks are strong, high-density polyethylene blocks developed to aid in the
safe handling of large or heavy sheets of glass. They are especially useful for tipping
large, heavy sheets of glass 90° vertically and will not chip or scratch the glass. The
wide pocket accepts thick glass, insulating glass and doors with patch fittings. Each
roller block has a maximum weight capacity of 181kg.
Usage
Each roller block has a cushioned 90° inside corner on which to rest the glass. The
rubber pads placed inside and outside prevent slippage and provide traction while
rotating or manoeuvring the glass into a vertical position. When turned over and
rested on their opposite side the roller blocks serve as resting blocks to keep glass
edges off of the floor.
Loading capacity: 181kg
150 Product Catalogue For Glass Processors & IG Manufacturers