GlassCatalogue_LowRes

Glass Grinding Tools / Grinding Accessories
GTS Diamond Hand Pads
GTS diamond hand pads are coated with a long-lasting diamond abrasive and glued
to rigid foam support pads. The handheld pads are for manually reworking the micro
chipping on glass. TELUM’s unique flexible design of coated diamonds distributed in
an interlocking arrow pattern gives the product superior grinding performance.
Features
• Durability and aggressive grains
• Less effort in rework with rapid and easier stock removal
• Conveniently sized for minimal effort and consistent finish
• Longer life
GTS Dressing Sticks
GTS dressing sticks are used at various intervals during the life of peripheral diamond
wheels or core drills for re-exposing the diamonds and optimising glass edge quality
and tool feed speed. The dressing stick sharpens the diamond which wears (glazes)
during grinding. Also, if the bond wear is slower than the diamond wear then the
grinding capability is reduced. A relatively soft abrasive Al2O3 is required to grind
away the bond and give greater exposure to the diamonds.
Features
• Highly friable, very hard grains
• Quick and consistent resharpening
• Less diamond tool wear
• Increased overall tool life
084
Product Catalogue For Glass Processors & IG Manufacturers