GlassCatalogue_LowRes

IG Machinery & Equipment / Rigid Spacer Processing
GMS Profile Bending Machine
The profile bending machine is a compact, portable machine
equipped with nylon pulleys assembled on ball bearings,
and controlled via a hand wheel, for the manual bending of
aluminium spacers for insulating glass production. The profile
bending machine can be incorporated into an insulated glass
production line for the manufacture of units with rigid spacer
frames.
Colour: Available in a wide range of colours
HJ-ASBM-2008-I
HJ-ASBM-2008-I is an automatic aluminium
spacer bending machine which cuts the
spacer frame after bending, automatically
avoiding all of the connectors between
spacers. The machine is controlled via a
PLC control system with a touch-screen
interface allowing for easy parameter
setting and shape selection.
Specifications
Dimensions (l x w x h)
10 000mm x 2200mm x 2600mm
Workable spacer width
5.5-20mm
Minimum size
250mm x 250mm
Maximum size
2000mm x 2000mm
Spacer frame error
±0.3mm/m
Angle error ±0.3°
Feeding speed
0-90m/min.
Air pressure
0.6MPa
Power
3P 380V/1P+N 220V, 50Hz, 4kW
116 Product Catalogue For Glass Processors & IG Manufacturers