24.01.2013 Views

Download - Freiwald Software

Download - Freiwald Software

Download - Freiwald Software

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

!<br />

B<br />

In the diagram displayed above the direction of travel of each block is here indicated by<br />

an arrow. TrainController does not display these arrows, though, but displays small<br />

signal symbols on two sides of each block, to mark the direction of travel, that belongs<br />

to the block.<br />

The direction of travel will correspond to the drawing of the block in the diagram. A<br />

block that is passed horizontally will be drawn as a horizontal rectangle while a block<br />

that is passed vertically will be drawn as a vertical rectangle. This is shown in the diagram<br />

displayed above.<br />

Engine Orientation<br />

Engine Orientation is seen from the engineer's point of view. It is not important for the<br />

passenger. The engine orientation describes the direction of the engine's head. For an<br />

engineer, who has to run a train in a certain direction of travel it is also important to<br />

know the engine's orientation, i.e. the direction of the engine's head. Depending to the<br />

intended direction of travel and the engine's orientation the engineer can decide,<br />

whether the engine is to be run forward or backward.<br />

When the Dispatcher runs a train, it acts like an engineer. Especially both information -<br />

the intended direction of travel and the engine's orientation - must be known by the<br />

Dispatcher to start the train accordingly.<br />

The orientation of each engine is specified during assignment of an engine or train to a<br />

block. There are several methods to assign trains to a block. The most convenient<br />

method is to drag & drop a train icon to the traffic box or the symbol of a block. Please<br />

check always that the current orientation of the engine matches the screen display.<br />

In case both do not match it is possible to revert the screen display with appropriate<br />

menu commands.<br />

Another method for automatic assignment of trains to blocks is the use of train detection<br />

or train tracking (see 5.5, “Train Detection and Train Tracking”).<br />

5.4 States of a Block<br />

The different states of a block are determined by the fact whether the block is occupied<br />

or whether it is reserved for a certain engine or train.<br />

107

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!