Download - Freiwald Software

!
Diagram 158: Assigning feedback indicators to a turntable
If a Marklin Digital Turntable 7686 or 7286+7687 is operated through your turntable
window, then three additional indicators are provided to display the state of the red,
green and yellow indicator light connector provided by the turntable device.
14.6 Automatic Operation of Turntables
All turntable commands can be assigned as operations to other elements like indicator
elements, push buttons or routes (see also section 12.3, “Operations”). In this way, turntables/transfer
tables can be operated by passing trains, through your switchboard or
automatically as part of schedules of the Dispatcher.
If you want to operate a turntable/transfer table automatically with the Dispatcher assign
the desired turntable operations to an appropriate route first. If this route is then assigned
to a schedule (see section 5.10, “Schedules”) each train running on that schedule
will first trigger the turntable operation and wait until the turntable command has been
executed completely. In this way it is assured that the turntable/transfer table has
reached the desired position, before the train will enter or leave the bridge of the turntable/transfer
table.
Please note, that the turntable/transfer table must support indexing in order to be
operated automatically. If you are using an analog or generic turntable/transfer
225