Download - Freiwald Software

The maximum number of tracks depends on the brand of the turntable/transfer table,
typical numbers for turntables are 24 or 48, respectively.
The track layout describes which of the available tracks of your turntable/transfer table
are connected to the tracks of your layout.
224
Diagram 157: Setting up the track layout of a turntable
By default all possible tracks of the turntable/transfer table are active, i.e. supposed to
be connected to the rest of your layout. A certain track, track that is not used is called
not active, if the opposite track is active. If neither a certain track nor the opposite track
is active, then both tracks are deleted.
In Diagram 157 you can see active tracks on the right side of the turntable, deleted
tracks on the upper and lower side and some inactive tracks on the left side.
14.5 Turntables and Feedback
It is possible to assign an indicator element to each active track, as well as to the bridge
of a turntable/transfer table. Whenever such indicator is turned on, then the associated
track or bridge his highlighted in the turntable window. In this way, it is possible to
control via the turntable window if a specific track or bridge is occupied or not.