Download - Freiwald Software

This is done in the following way:
• Open the macro list and create a new macro “Whistle”.
• Specify “Whistle on”, “Delay 2000 milliseconds” and “Whistle off” as operations
of the macro according to Diagram 127.
• Assign macro “Whistle” as engine function or as an operation to be performed by a
schedule.
Diagram 127: Setting up macro Whistle
For a detailed discussion about engine functions refer to section 3.6, “Headlights, Steam
and Whistle”, please.
12.7 External Control Panels
Running an external control panel simultaneously with your computer is made possible
by TrainController. One solution is to not connect the buttons of your external control
panel directly to your model railroad, but indirectly through the feedback decoders
of your digital system. If a button on your external control panel is pressed, then this
event is reported to the computer as a feedback signal by the digital system. With
TrainController, you are able to create appropriate contact indicators to monitor
189