Download - Freiwald Software

!
!
X
In conjunction with the possibility to select successors randomly it is possible to control
a hidden yard automatically. A train arriving in a hidden yard can be enabled to select
another waiting train, which will leave the hidden yard.
If it is intended to start the successor with the same train, then it is recommended,
that the successor starts with a destination block of the previous schedule. In this
block the control of the train is transferred to the successor.
It is also possible to specify that all listed successors are started. These successors are
started simultaneously, when the previous schedule is about to be terminated.
If several schedules shall be executed in a sequence, e.g. schedule 2 shall be executed
after schedule 1 and schedule 3 shall be executed after schedule 2, then
schedule 2 is to be specified as successor of schedule 1 and schedule 3 as successor
of schedule 2.
Since it is not possible to reverse a train or to change trains during the execution of a
schedule successors must be used if
• a train shall be reversed
• trains shall be changed
5.14 Schedule Selections
Sometimes it is desirable to select one of several schedules. This is supported by schedules
selections. A schedule selection enables the selection of certain schedules out of a
selection of several other schedules. Even though there is schedule diagram associated
with a schedule selection such selection can be started like any other normal schedule.
It can be used wherever a normal schedule can be used. When a schedule selection is
started then one or more of the schedules contained in the selection are selected and
started. This selection may also include other schedule selections.
149