Download - Freiwald Software

the switches are correctly working and also, to bring the digital addresses of the
switches back to your mind. This is needed in the next step.
Preparing a Switch for Model Railroad Computer Control
Ensure, that the Edit Mode option in the View menu is still active (see Diagram 4).
Now click to the symbol of the left switch in the track diagram and select the Properties
of the Edit menu. Do you remember? This command is used for all objects contained
in the software (trains, turnouts, signals, routes, etc.), whenever it is required to
change the settings of the particular object. The following window is displayed now:
Click here
to test the switch.
Click here to adjust
the status of the switch.
Diagram 15: Specifying the Digital Address
Specify the same address, that you have been using previously to control the corresponding
real switch with your digital system, in the field labelled Address. Now click
to the symbol of the switch, that is located right of the label Test. The real switch on
your model railroad layout should respond now. Depending on the wiring of your
switch it may happen, that the image in the software and the physical switch do not
show the same status (closed vs. thrown). If this is the case click to the grey circle in the
23