Download - Freiwald Software

!
!
It is also no problem, if you started to draw the “wrong” part of your layout in the main
window of the switchboard and want to exchange this track diagram with another track
diagram, that has been drawn in an additional switchboard window. It is possible at any
time, to exchange the content of the main window and the content of an additional
switchboard window.
It is also possible, to turn on automatic calculation of the block diagram again, after
a certain time of working with a manually created block diagram. This function
is to be used with extreme care, though! Existing routes and blocks may be deleted
and replaced by calculated blocks and routes. Existing schedules may be affected,
too, and may become invalid, too!
You can safely turn on calculation of the block diagram and check, if you like the result.
If you do not like it, you should not save the result to your original data file, because
this will overwrite your original data stored on the disk of your computer.
192
Editing the Block Diagram
For manual editing of the block diagram the automatic calculation of the block diagram
must be turned off. TrainController provides powerful and intuitive tools for editing
of the block diagram and for insertion of blocks, routes and links to this diagram.