Download - Freiwald Software

After pressing OK the symbol and the name of the train will appear in “Block 1” in the
switchboard control panel:
32
Diagram 27: Display of Train Positions on the Computer Screen
Instead of using the Assign Train command you can also drag and drop the train symbol
with the mouse from another place on the computer screen to “Block 1”, if the train
symbol is visible somewhere else.
Now run the train with the on-screen throttle of the train window displayed in Diagram
8. When the train travels to another block, then the display should be updated accordingly
and the name and symbol of the train should move to the symbol of the other
block, too. If you are testing this on a bigger layout ensure please, that the train does not
leave the area, that is controlled by blocks and feedback sensors as described so far.
If all steps are performed correctly so far, then you are able to control the movement of
your train and operate your switches with TrainController. You are also able to
track the positions of moving trains on the computer screen.