Download - Freiwald Software

This feature is useful if,
• you have a large collection of engines and not all are digitally upgraded.
• you have a conventional - i.e. non-digital - operated model railroad and want to control
your layout with your computer without installing a digital decoder in each engine
first.
• the models of your engines are very small and the decoders do not fit into the engines
(e.g. when you run Z scale).
In all, TrainController provides three methods of operation:
• Operating trains using mobile decoders installed in the engines (“Computer Command
Control”).
• Operating conventional trains using stationary block decoders with static assignment
to track sections (“Computer Section Control”)
• Operating conventional trains using stationary block decoders with dynamic assignment
to track sections (“Computer Cab Control”).
Additionally, it is possible to use these methods simultaneously, i.e. it is possible to run
conventional engines and digital engines on the same track - even if your digital system
does not support this feature.
42
Use
TrainController is easy to use. It provides an easily learned, intuitive, graphical user
interface that is developed according to the following guidelines: