Download - Freiwald Software

of traveling engines and trains under its control, it can also assign the appropriate stationary
block decoders automatically to the engines.
254
Additional Options
In order to operate stationary block decoders, select the Option Stationary Block Decoder
in the Setup Digital Systems dialog box (see Diagram 178).
Diagram 178: Arranging the Digital Systems to use Stationary Block Decoders
When stationary block decoders are used, then in the Block Dialog Box an additional
tab labeled Connection appears (see and). Here the digital addresses of the stationary
decoders, which are associated with this block, are to be specified.
For each conventional engine select the Option No Connection in the tab labeled Connection
of the Engine Dialog Box.