Strato X User Manual - Image Works

USER'S MANUAL
General instructions for use
NOTE:
Exposure values displayed are changing according to the selected mode
(longitudinal or cross).
NOTE:
If there is no cassette, the following message will be displayed:
> S T A R T E X A M <
I N S E R T C A S S E T T E
The examination will not be continued until the cassette has been
inserted.
NOTE:
The rotation of the arm and the emission of the rays will start with a
delay of 2 seconds from pressing the X-ray button "30". Since the X-ray
button is a "dead man control, it must be kept pressed until the end
of the exposure.
2. Once the exposure is completed, the system will rotate to its initial
position. At the end of this movement, the following message will be
displayed:
P A T I E N T E X I T
P R E S S → 0 ←
At this point, the patient can be freed from the positioning device.
NOTE:
If the examination is made in "Test" mode with the patient already in
position, he must not be removed from the temple support group to avoid
having to reposition him.
Press button "10"
to return the unit to its initial position. This
movement can be stopped by pressing button "9" .
STRATO X (120V) 100
(Rev. 1)